Luxfer 11.1ltr Aluminium Cylinder with MDE Valve

The Luxfer 11.1lt aluminium diving cylinder is the cylinder of choice for stage decompression diving. this stage cylinder comes fully assembled and O2 clean ready for oxygen service use.

The valve can be supplied as either left or right hand configuration to suit specific sidemount systems. (note the valve shown above is a right hand valve)

The cylinder is of a brushed finished and uncoated to keep an even patina as the cylinder gets older.

 Luxfer 11.1lt/80cuft Alu Cylinder, Brushed Finish

• Proprietary 6061 alloy, a balanced aluminum-magnesium-silicon blend exclusive to Luxfer.
• Cycle-tested in excess of 100,000 cycles at service pressure.
• Minimum burst pressure tested to 2.5 times service pressure without failure.
• Manufactured to all recognized international standards.
• Corrosion-resistant interior and exterior, unlike corrosion-prone steel cylinders.
• Nitrox-ready: New Luxfer scuba cylinders are specially prepared at the factory to be suitable for use with oxygen-enriched air mixtures. (It is the responsibility of the cylinder owner to maintain this suitability, including using only Nitrox-compatible components with Luxfer cylinders in oxygen-enriched service.)
• Consistent weight.
• Thick, damage-resistant walls.

MDE Valve

• Incorporating a completely new internal design, heavy duty spindle with double ‘o’ ring and backup ring for total sealing and smooth operation.
• The spindle has a large 7.5mm square drive along with the 15.7mm diameter Teflon coated threaded seat with a polyamide insert.
• The new valves are operated by a large 40mm diameter tactile grip handwheel, and the valve body is temperature stress relieved after machining which eliminates the risk of stress cracking in later service.
• The valve is designed and manufactured in accordance with CE97/23, CE99/36, EN ISO 10297:2006 & UNI EN250 (Thread Form M25 x 2), including full certification for CE O2 adiabatic compression tests together with Pi mark impact testing.